Reusable proofing & baking sheets for professional bakeries

GLISS is a reusable PTFE-coated fiberglass sheet for commercial bakeries: dough is proofed, retarded and baked on the same sheet, which replaces the linen couche, the proofing basket for elongated loaves, and baking paper. Imported and sold in Israel by Water & Flour (Oran Kamelgarn).

Continuous use up to 260°C. Lab-tested by SGS to FDA 21 CFR 177.1550, LFGB §30/31 and REACH SVHC.

In short: place the shaped dough on the sheet, fold pleats between the loaves, proof or retard as usual, then move the whole sheet to the loader, pull it flat, score and bake. Shake off the flour and the sheet is ready for the next round.

Baguettes retarding on GLISS Artisan sheets folded into pleats like a linen couche, on trays in a bakery rack

How it fits the bakery workflow

Baguette example with Artisan Hybrid, from shaping to the oven.

  1. Place and fold

    Put the shaped dough on the sheet and fold pleats between the loaves, as with a linen couche. Flour the sheet lightly as needed; some products need no flour at all.

  2. Proof or retard

    Proof at room temperature or in the proofer, or retard overnight in the cooler on the same sheet. The sheet does not absorb moisture.

  3. Load in one move

    Move the whole sheet onto the loader and pull it flat; the loaves space out. Score right on the sheet. Cutting the sheet is fine, preferably with scissors or a Japanese knife.

  4. Bake on the sheet

    The sheet goes directly onto the oven deck, stone or floor, with the dough on it. Never in direct contact with a heating element or flame.

  5. Shake and reuse

    After each bake, shake the sheet or brush it with a dry brush. It is ready for the next round.

Baker moving a GLISS sheet with scored loaves onto a deck-oven loader in one move

The whole tray loads in one move

With a linen couche, every loaf is rolled onto a flipping board and then onto the peel or loader. On a GLISS sheet, the whole tray goes into the oven at once.

By our estimate about 3× faster. This is an estimate from the workflow, not a measurement.

The full cycle in one video — from folding to unloading, in a commercial bakery.

What it replaces

Linen couche

Folds between loaves like linen, but does not absorb moisture or flour, so it does not develop mold the way a linen couche does. What stays on it washes off with water. Guide: linen couche alternatives compared.

Proofing baskets for elongated loaves

For baguettes, batards, ciabatta and other elongated loaves, the pleats give each loaf its sides, so these products need no basket. The loaves bake on the same sheet.

Baking paper

A reusable sheet instead of disposable baking paper that has to be bought again and again. Less dusting flour on a non-stick surface also means less flour dust in the air.

Models and prices

All models are PTFE-coated fiberglass, rated for continuous use up to 260°C.

ModelSizeThicknessSurfaceUsePrice (excl. VAT)
Artisan Hybrid60×40 cm0.11 mmTexturedLinen couche replacement: baguettes, batards, ciabatta, elongated loaves₪15 / sheet
pack of 25: ₪375
Artisan Large80×60 cm0.11 mmTexturedSame use on large deck trays; about 8 baguettes or 8 loaves per sheet. Not for pizza.₪30 / sheet
pack of 10: ₪300
Daily60×40 cm0.08 mmSmoothBaking paper replacement for everyday products: croissants, macarons, meringues, breakfast pastries₪14 / sheet
pack of 25: ₪350
Heavy-Duty60×40 cm0.13 mmSmoothFocaccia, pizza, heavy doughs; pretzels after lye dipping₪18 / sheet
pack of 25: ₪450
Trial kit60×40 cmmixedmixed15 sheets: 5 Daily, 5 Heavy-Duty, 5 Artisan Hybrid₪200 / kit

Prices in Israeli shekels (ILS), excluding 18% VAT. Sold and delivered within Israel; online ordering is on the Hebrew catalog. Other sizes and thicknesses on request. The trial kit is for testing in your regular production; if the sheets fit, talk to us about quantities.

Care, temperature and lifespan

Care

After every bake, shake the sheet or brush it with a dry brush. Once a week to once a month, depending on use, wash it with water, with or without soap. Dry it and put it back to work.

Temperature

Continuous use up to 260°C, placed directly on the oven floor, stone or deck, never touching a heating element or flame. In our tests the Heavy-Duty sheet also worked in a 450°C oven, and lasted 20+ bakes in a pizza oven; it also works in a conveyor oven. At such heat the coating wears faster, and above about 350°C PTFE starts to decompose (per Chemours), so very hot ovens need good ventilation.

Lifespan

Over a year with normal use up to 260°C. Heavy-Duty also works for pretzels after dipping in lye (sodium hydroxide); lye shortens the sheet's life to about half a year in that use.

Food-contact certifications

The sheets were tested by the SGS laboratory. Reports are available for inspection.

  • FDA 21 CFR 177.1550 (perfluorocarbon resins): extractives test, pass (SGS, 2025).
  • LFGB §30/31 under EU Regulation (EC) 1935/2004, including BfR Recommendation LI: overall migration, PAHs, chromium, aromatic amines, bisphenols, colour release, odour and taste, pass (SGS, May 2026).
  • REACH SVHC screening: 247 substances, each at or below 0.1%, pass (SGS, 2025).

Questions bakers ask

What is GLISS?
GLISS is a reusable PTFE-coated fiberglass sheet for proofing and baking in commercial bakeries. Dough is proofed, retarded and baked on the same sheet, and the whole sheet goes into the oven with the dough. GLISS is imported and sold in Israel by Water & Flour (Oran Kamelgarn).
Is GLISS related to the Gliss hair-care brand?
No. GLISS baking sheets have no connection to Schwarzkopf's Gliss hair-care products. GLISS is a bakery-equipment brand of reusable proofing and baking sheets, sold in Israel by Water & Flour.
Does dough proofed on a PTFE sheet get the same crust as on linen?
Close, not identical. The sheet does not absorb moisture, so the dough surface dries less than on linen and the crust looks slightly different. Flour the sheet lightly as needed, not too much; some products need no flour at all.
What temperature can a GLISS sheet take?
Continuous use up to 260°C, directly on the oven deck or stone, never touching a heating element or flame. In our tests the Heavy-Duty sheet also worked in a 450°C oven, and lasted 20+ bakes in a pizza oven. At such heat the coating wears faster, and above about 350°C PTFE starts to decompose (per Chemours), so very hot ovens need good ventilation.
How do I order GLISS sheets?
Through the Hebrew online shop at glissbaking.com/products, or by WhatsApp (+972-54-639-8609) or email (glissbaking@gmail.com). Prices are in ILS excluding VAT, and delivery is within Israel. Most bakeries start with the trial kit: 15 sheets for ₪200 + VAT.

Test it in your own production

Trial kit: 15 sheets (5 Daily, 5 Heavy-Duty, 5 Artisan Hybrid) for ₪200 + VAT. Use them in your regular work; if they fit, talk to us about quantities.

Last updated: